$15.53
CLIGHT are supplied complete with downlight, clips, 50cm lead and 2 pin Australian plug.
The iZone basic LED down lights is a low cost “dumb” LED.
If used in conjunction with and iZone LED Dimmer module or iZone LED Dimmer + Switch module it can be controlled via your iZone system.
The colour temperate can be altered by a three position dip switch on the top of transformer casing.
| Weight | 0.215 kg |
|---|---|
| Dimensions | 8 × 8 × 15 cm |
| Model numbers | CLIGHT |
| Certification | AS/NZS 60598.2.2; C Tick, SAA, CE, IP44; IC-4 |
| Power supply | Input: 220 – 240VAC ~ 50/60Hz |
| Connection | 2 Pin Australian GPO plug |
| Transformer | Built in |
| Power lead | 0.6 meters |
| Power consumption | Maximum 10.0 Watts on full brightness (4000K)
|
| Brightness | Maximum 794 Lumens |
| Colour adjustable | Cool (6000K)
Neutral (4000K) Warm (3000K) (Manual control via dip switch on the top of the down light) |
| Efficiency | 80 Lumens / Watt (Cool White) |
| Beam Angle | 120 |
| Dimmable / controllable | Yes – fully compatible with iZone Relay, Dimmer and Dimmer + switch module (CACR, CACD & CADSW) |
| Operating Temperature | -20oC to +50oC |
| Environment | IP44 rated
Suitable for indoor use only. Suitable for alfresco, porch and bathroom use. |
| Rating
|
Suitable for residential or commercial use in Australia and New Zealand. Used where air transfer is not permitted or not desired between living space and roof space (there will be no air transfer between spaces even if there is no insulation covering the luminaire). These luminaires have been tested to 90oC and will automatically reduce in brightness to prevent over temperature. |
| Size & Weight | Height: 58 mm
Diameter 115 mm Hole cut size: 90 mm Weight 192 g |
.png)
