Home » iZone Smart Plugs » 240V AC 1 AMP LED Wireless Blind Module
Roller Blind Motors – Important Please Read !
Please note there are many different blind motor brands, makes and models available, however only certain motors will work with the iZone Roller Blind Module. All roller blind motors used on an iZone roller blind module need to be 240V~50Hz with a 4 wire connection and suitable for home automation control (Such as C-Bus). All roller blind motors must be fitted with mechanical stops. Electronic stops will not work correctly.
If the roller blinds are to be run in parallel (more than one blind operated by a single iZone roller blind module) the motors used must be suitable for parallel configuration. If the motors are not suitable for parallel operation you will need to install one iZone roller blind module for each roller blind. You can still operate them as a single blind by grouping the iZone roller blind modules in the configuration menu.
Check with your roller blind supplier to ensure the motors you are using are correct. A list of compatible roller blind motors are listed here. This list is not comprehensive. If you find other models that are suitable please send iZone and email and we will be happy to add them to the appropriate section.
iZone Roller Blind Module
The Roller blind module is hard wired to the mains power and uses wireless RF for the control communication. This module is only suitable for locating indoors however, it can control blinds which have a suitable rating that are located outdoors or in wet areas
Minimum 1.05 Watts switched off
Width 85 mm
Depth 36 mm (Excludes Antenna)
(Designed to fit through a standard 95mm diameter down light hole)
iZone Smart Plugs
iZone Smart Home Solutions
Warranty Registration Form
iZone Smart Indoor Camera
iZone Smart Screw Bulb
Hard Wired Switch – 240V AC 1 AMP LED Dimmer
iZone Nexus Controller