iZone

Connect With Us

240V AC 1 AMP LED Wireless Dimmer Module

$137.50

Description

The Dimmer module is hard wired to the mains power and uses wireless RF for the control communication

To comply with Australian / NZ wiring rules a Dimmer module should always be used when controlling circuits that require the control device to be installed in the roof space

This module is only suitable for locating indoors however, it can control lights which have a suitable rating that are located outdoors or in wet areas

The Dimmer module is not suitable for speed control of ceiling fans.  Conventional dimmers cannot  be incorporated into a circuit using an iZone Dimmer module

Specifications

Model numbers CACD
Certification AS/NZS 61058; C Tick N29007;
Power supply Input: 220 – 240VAC 50Hz
Power consumption Maximum 2.05 Watts switched on (no load connected)

Minimum 1.2 Watts switched off

Maximum load 1 Amp
Connection Hard wired
Control frequency 433 MHz
Operating Temperature -20oC to +50oC
Environment Suitable for indoor use only
Requirements An iZone Wi-Fi Bridge (COCB) is required to control an iZone Roller blind module
Dimensions Height: 150mm (Excludes mounting lugs and antenna) / Width 85mm / Depth 36mm (Excludes Antenna)

(Designed to fit through a standard 95mm diameter down light hole)

Weight Weight 225g

 

Brochures

iZone Smart Plugs
iZone Smart Home Solutions

Manuals

Warranty

Warranty Policy
Warranty Registration Form

Get a quote for a smart
home from iZone

Step 1: Choose your product